The XD driver interface has substantial contact friction in the system, which leads riders to feel that they have torqued the assembly correctly when in fact the cassette is still loose on the driver. JavaScript seems to be disabled in your browser. Maximum torque we recommend applying is 40 Nm. Thanks George, lagged the freehub and cassette with grease as everyone has said the same. I’ve been plagued with the dreaded creaking issues with my rear cassette. I normally use Shimano cassettes which are pretty self explanatory. Tools you will need.

Uploader: Nikosida
Date Added: 6 May 2016
File Size: 51.90 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 14360
Price: Free* [*Free Regsitration Required]

After that, you will need to tighten the outer lockring. Headed home tonight to re-assemble all this Remove the outer cassette lockring, unscrewing it in counter-clockwise direction.

MartinKS Apr 30, at When I push the cassette onto the freehub, the splines at the back barely engage feels like 3 or 4mm before the threads on the cassette meet the threads on the freehub. And what do you know I started contemplating the purchase of a new cassette but instaloing came across this write-up. No matter where I position the cassette on the freehub the depth of engagement is always the same.

Last Drivers  DRIVER FOR HP LJ M1522N SCAN

XX1 Cassette Install / Creak Check

For the best experience on our site, be sure to turn on Javascript in your browser. I followed the instructions and voila, no more noise.

Rockrover Apr 10, at 7: Post a Comment Login or Sign Up. Took me instakling to track the noise down to the cassette, which was confirmed by swapping to a different cheaper cassette. Misaligned cassette placement on the driver body may damage the cassette as well as the driver body. ReallY hope this works for me. Don’t have an account?

Maximum torque we recommend applying is 45 Nm. Viewing 6 posts – 1 through 6 of 6 total.

This site uses cookies. A cassette, unlike the freehub body, has key-less splines, and you can install it on the freehub in any position. Thanks, sounds like it might just need the extra persuasion then?

I believe it’s the pins holding the 42t to the machined cassette body. Anyone know what the torque spec is, having a difficult time finding it online.

Fitting a Sram XD cassette onto a XD freehub help.

I then cleaned up the cassette, greased the interface points as mentioned above, and torqued to spec 40Nm. Just a tad worried fudging a brand new freehub and cassette. Mobile Version of Website. Clean the unstalling and mud from the freehub splines and threads.


Installation guidelines: XD-compatible cassette (2nd gen.)

If necessary, hold the inner lockring with your hand. Please refer to this manual if your XD-compatible cassette is an updated version you can read about the differences between an updated version and previous one here. I followed the procedure above to no avail, until I repeated the process while adding a liberal amount of penetrating lubricant to the pins Then just this weekend I had to change a failed drive side bearing on my Stans 3. We’re going to touch in specific on XX1 Cassette installation and where we have commercially found creak issues.

Make sure the outer lockring is screwed correctly and tighten it with a removal tool. Tools you will need. However, make sure to check whether the cassette is fitted securely and tightly on the splines.

Work with a qualified resource as needed.