It claims a Phoenix bios must be present but it must a specific version too, as the supporting laptop old Gateway Solo does have a Phoenix bios I haven’t made a swap as I was afraid of hosing that too when put in the OmniBook but I could make a copy ghost to the new HDD before the swap. What you need to do is after formatting the drive in a desktop, you have to make it bootable by making the partition on it active and using the sys command to write the system files to it. Try with WinXP so that we have the “most” intelligent one at 1st try. The version displayed is CK. Install the hard disk and boot to DOS.

Uploader: Kigajinn
Date Added: 20 September 2016
File Size: 39.17 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54407
Price: Free* [*Free Regsitration Required]

HP OmniBook Specs – CNET

Thus, I don’t hp omnibook 4150 usb a ram error is very likely hp omnibook 4150 usb, of course, you never know If I plug a USB mouse, it will recognize it and work just fine. Laplinking is not that hard, you will need to enable Direct Cable Connection in your Windows setups on the respective machines.

BTW, I’m using Oknibook 5. Ask your question anytime, anywhere, with no hassle. On that drive existed an partition with the HP diagnostic program which I once ran – mostly for fun – and it reported no errors. I don’t think so as the bios reads the drive specs correctly.


You need to upgrade your browser

Have in mind that no diskette drive is present. DOS can be installed on the drive and will ub when the drive is moved from the supporting machine to the OmniBook.

No more ideas on this? I started it, it programmed, then 1 minute later, omniibook says A: En Enfer This account has been compromised join: En Enfer to dbmaven Member Feb 9: Solutions Learn More Through Courses.

Once XP is setup you will be offered a boot selection on startup. Start your hp omnibook 4150 usb free trial.

BUT the machine doesn’t even have a floppy drive! There’s 2 things that the program does: En Enfer to dbmaven. It’s more than this solution.

HP Omnibook 4150 LCD Monitor

hp omnibook 4150 usb Get the help and guidance you need from experienced professionals who care. This was different from what I had tried before where the WinXP was installed on a desktop machine. Experts Exchange Solution brought to you by.

Remove it before you reboot”. Formatting the disk will not erase the MBR, however running setup of your operating system may alter it.

Last Drivers  FUJITSU MC8305 DRIVER

I haven’t used it myself but here is a link: I recall faintly something about a hypernate partition on the original drive. This is usv tough one and I will gladly offer points more for a solution. The bios seems to read the new drive correctly, it reports about 19 GB. Either it reports Missing Operating System or nothing at all except a blinking cursor. Seems that if the installed WinXP is somewhat close to hardware in another machine, you can move the hp omnibook 4150 usb and WinXP will adjust to the new hardware environment.

Serial, Parallel, And Usb Problems – Hp OmniBook Reference Manual [Page ]

Win95 reports prior to the first reboot that “A diskette is detected in the diskette drive. Testing has hp omnibook 4150 usb included leaving a bootable partion as well as having removed all partions prior to the new test partition. My boss gave her a USB memory key, but it just won’t work. Lets leave the rest space unused for the test.